808nm Laser Handpiece (OEM Replacement)

$360.00

Plug-and-play replacement handpiece for 808nm diode lasers. 10 million shot rated.

40 in stock

SKU: LW-ACC-HP808 Category:
  • CE / FDA certified components
  • 24-month warranty · lifetime technical support
  • Worldwide shipping from Shenzhen
  • OEM / ODM & private labeling available

The short version

A plug-and-play replacement handpiece for the 808nm and triple-wavelength diode platforms, rated for 10 million shots and supplied with a spot-size verification certificate. Handpieces are the consumable part of a diode laser — this is the part that keeps a machine earning instead of sitting idle waiting for a shipment.

Description

OEM-spec replacement handpiece compatible with our 808nm and triple-wavelength diode platforms. Supplied pre-tested with spot-size verification certificate.

Specifications

Wavelength 808nm
Rated lifespan 10,000,000 shots
Spot size 12 × 12 mm / 12 × 24 mm
Cooling Sapphire + TEC

When to replace rather than repair

A handpiece fails in three ways: the shot counter reaches its rating, the sapphire window chips, or the diode stack degrades and fluence drops below the protocol. The first two are straightforward; the third shows up as clients saying sessions hurt more and work less.

TreatmentTypical protocolWhy it matters commercially
Shot counter near ratingOrder at 80% of the ratingA machine waiting on a handpiece is a machine losing bookings
Chipped sapphireReplace immediatelyA chipped window scatters energy and burns
Reduced fluenceTest with an energy meter before replacingSometimes the fault is the driver board, not the handpiece
Frequent over-temperature faultsCheck the water circuit firstCooling faults are cheaper to fix than handpieces

Handpiece options

OptionShotsBest for
Standard 12 × 12 mm10MGeneral hair removal
Large 12 × 24 mm10MLegs, back, chest — coverage over precision
Mini 12 × 12 mm5MLW-DL-MINI portable unit

Certification and compliance

What ships with the machine, and what stays your responsibility as the importer.

  • Supplied with a spot-size and energy verification certificate for your service records.
  • Fitting a non-approved handpiece voids the machine warranty — this one is approved for our platforms.
  • Class 4 laser PPE requirements apply whenever the handpiece is connected and the unit is armed.

Full documentation detail on the certification page.

Order terms

Minimum order 1 unit
Lead time 48 hours from stock
Packing Foam-lined carton with protective cap
Shipping DHL/FedEx 4–7 days; consolidated with other spares on request
Payment PayPal or T/T
Warranty 12 months or the rated shot count, whichever comes first

Freight and duty by market on the shipping page.

After-sales and support

  • Energy-meter test procedure supplied so you can verify the new handpiece on arrival.
  • Video walkthrough for fitting and first power-on.
  • Core exchange available on failed units.

Questions buyers ask about this

Will this fit a machine I bought elsewhere?

Only if that machine uses the same connector and driver protocol — most generic Chinese 808nm platforms do, but not all. Send us a photo of the connector and the model plate and we will tell you before you order rather than after.

Does the shot counter reset?

The handpiece carries its own counter which the machine reads on connection. A new handpiece starts from zero; the machine's historical total stays in its service log.

How long does shipping take?

48 hours to dispatch, then 4–7 days by courier. If you are in the middle of a busy season, tell us — we can ship before payment clears for established accounts.

Chat Now Get a Quote